WhichRemote Send a photo

Hörmann RSC 2 (EcoStar) remote

The Hörmann RSC 2 (EcoStar) is a rolling-code remote on 433.92 MHz, so a cheap universal remote can’t copy it. It’s paired at your motor, or from a remote that already works, and we send simple steps for yours.

Brand
Hörmann
Model
RSC 2 (EcoStar)
Frequency
433.92 MHz
Code
Rolling code
Works with
EcoStar Liftronic 500 / 700 / 800 garage door operators, Receiver RERI 1 / RERE 1

£50.99 genuine remote, with set-up help

Total with UK delivery (£3.99): £54.98

Optional. If it turns out not to be the right remote for your door, we’ll replace it or refund you.

Buy now for £54.98

By buying you agree to our terms of sale, including your 14-day right to cancel. If a remote turns out to be discontinued, we’ll refund you in full.

Not sure it’s yours? Check with a photo before you buy.

About the Hörmann RSC 2 (EcoStar)

The RSC 2 is a small oval keyfob with two stacked buttons, part of Hörmann’s EcoStar budget range and used as the standard remote for the Liftronic 500, 700 and 800 garage door operators, along with the matching RERI 1 and RERE 1 receivers. It runs on a rolling code but isn’t compatible with Hörmann’s separate 868 MHz systems.

Is this your remote?

Look on the label or the back of the remote for:

RSC2-433RSE2-433433 MHz

What it looks like: A small oval keyfob with two oval buttons stacked one above the other and a red light at the top.

Also sold as: RSC2-433, RSE2-433, RSE 2, EcoStar RSC 2, Handsender RSC 2.

Still not sure? Upload a photo below and we’ll match it, or send it and we’ll check it by hand.

What it works with

  • EcoStar Liftronic 500 / 700 / 800 garage door operators
  • Receiver RERI 1 / RERE 1

How it’s set up

This is a rolling-code remote: its signal changes every time you press it, so a universal copying remote won’t work. It has to be paired with your system, either at the motor or receiver, usually with a learn or program button, or from a remote that already works. It normally takes a couple of minutes. Rolling code vs fixed code explains why.

We email simple steps for your system with every order, and if it won’t pair, email us and we’ll walk you through it.

Seen it cheaper somewhere else?

Check it’s the genuine Hörmann remote. Many cheaper listings are copies or “compatible” remotes, not the manufacturer’s own. A genuine Hörmann remote has the Hörmann name on it, usually on the front or on the label on the back, along with the model name. Copies often leave the name off, and some won’t pair with a rolling-code system at all. A universal remote that works by copying can’t copy a rolling code.

Every remote we sell is the genuine Hörmann remote, with set-up help included.

Other Hörmann remotes

Every remote we sell

Not sure which remote you need?

Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.

It’s free, and you don’t have to buy it from us.

Send us a photo

Instant match

Your remote, motor or control box

Whichever you can actually get to. A close photo of the label works best.

We read it on your device to find a match. It’s only sent to us if you press Send. Privacy
Rather email? Email us a photo

Free, and no obligation. We’ll tell you what you need even if you buy it elsewhere.